牟泉宇^1,2,邹德旭¹
MOU Quanyu^1,2, ZOU Dexu¹

• 1:云南电网有限责任公司电力科学研究院， 昆明 650217
• 2:华北电力大学， 河北 保定 071003

摘要(Abstract)：

针对变压器套管电连接失效易引起变压器起火、燃爆等问题，基于综合运行工况分析面面压接型电连接在静力试验中的等效方法，并对面面压接型电连接进行静力试验，通过静力试验得到接触电阻与电连接静力的关系，采用经验公式进行验证。结果表明：面面压接型电连接的接触电阻随着轴向应力的增大而减小，随着径向应力的增大而增大；经验公式中的系数对接触电阻值有较大影响；机械磨损是导致接触电阻增大、电连接劣化的主要原因。
Aiming at the problems that the failure of the electrical connection of the transformer bushing can easily cause the transformer to ignite and explode, based on comprehensive operating conditions, the equivalent method of surface to surface crimping electrical connections in static tests is analyzed, and static tests are conducted on surface to surface crimping electrical connections. The relationship between contact resistance and static force of electrical connections is obtained through static tests, and verified using empirical formulas. The results show that the contact resistance of surface to surface crimping electrical connections decreases with the increasing of axial stress and increases with the increasing of radial stress. The coefficient in the empirical formula has a significant impact on the value of contact resistance. Mechanical wear is the main cause of the increased contact resistance and the deterioration of electrical connections.

关键词(KeyWords)： 变压器套管;面面压接型电连接;接触电阻;应力;机械磨损
transformer bushing;surface to surface crimping electrical connection;contact resistance;stress;mechanical wear

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 牟泉宇^1,2,邹德旭¹
MOU Quanyu^1,2, ZOU Dexu¹

DOI: 10.19929/j.cnki.nmgdljs.2023.0029

参考文献(References)：

• [1] 张施令，彭宗仁，吴昊.±800 kV换流变压器阀侧干式套管的损耗分析[J].电网技术，2014，38（7）：1758-1764. ZHANG Shiling, PENG Zongren, WU Hao. Analysis on Power Loss of Valve-Side RIP Bushing for ±800 kV Converter Transformer [J]. Power System Technology, 2014, 38(7): 1758-1764.
  [2] 张施令，彭宗仁.±800 kV换流变压器阀侧套管绝缘结构设计分析[J].高电压技术，2019，45（7）：2257-2266. ZHANG Shiling, PENG Zongren. Design and Analysis of Insulation Structure of ±800 kV Valve Side Converter Transformer Bushing [J]. High Voltage Engineering, 2019, 45(7): 2257-2266.
  [3] 孙夏青，赵林杰，王文奎，等.换流变压器阀侧套管选型技术[J].南方电网技术，2015，9（4）：60-67. SUN Xiaqing, ZHAO Linjie, WANG Wenkui, et al. Type Selection Technology of Valve-Side Bushing of Converter Transformer[J]. Southern Power System Technology, 2015, 9(4): 60-67.
  [4] 彭翔天，尹建军，高燃，等.一起1000 kV变压器高抗套管乙炔超标故障分析[J].东北电力技术，2021，42（2）：30-32. PENG Xiangtian, YIN Jianjun, GAO Ran, et al. Failure Analysis of 1000 kV Transformer High Voltage Shunt Reactor Acetylene Exceeded[J]. Northeast Electric Power Technology, 2021, 42(2): 30-32.
  [5] 苏文，穆靖宇，马凯.一起220 kV侧变压器套管过热诊断[J].东北电力技术，2019，40（1）：21-22，27. SU Wen, MU Jingyu, MA Kai. Diagnosis for 220 kV Transformer Bushing Overheating[J]. Northeast Electric Power Technology, 2019, 40(1): 21-22, 27.
  [6] 关向雨.气体绝缘母线接头接触失效机理研究[D].武汉：武汉大学，2015.
  [7] 胡洁梓，罗宏建，张杰，等.变压器出线套管线夹开裂事故分析与预防[J].浙江电力，2019，38（4）：114-118. HU Jiezi, LUO Hongjian, ZHANG Jie, et al. Analysis and Prevention of Outlet Casing Clamp Cracking of Transformer[J]. Zhejiang Electric Power, 2019, 38（4）：114-118.
  [8] 王青于，杨熙，彭宗仁，等.应用三维电磁-热-流耦合场分析法计算换流变压器干式套管的温度场分布[J].中国电机工程学报， 2016，36（22）：6269-6275. WANG Qingyu, YANG Xi, PENG Zongren, et al. 3D Coupled Electromagnetic - Thermal - Fluid Method for Computation of Temperature Field of Converter Transformer RIP Bushings[J]. Proceedings of the CSEE, 2016, 36(22): 6269-6275.
  [9] 周安春，高理迎，冀肖彤，等.干式SF6气体绝缘换流变压器阀侧套管电流致热型放电故障分析及现场修复[J].电网技术，2018，42（5）：1401-1409. ZHOU Anchun, GAO Liying, JI Xiaotong, et al. Analysis and Field - Repair of Current Overheating Faults on Dry Type SF6 Gas-Insulated Valve Side Bushing in Converter Transformer[J]. Power System Technology, 2018, 42(5): 1401-1409.
  [10] 田汇冬，靳守锋，龚傲，等.换流变阀侧干式套管表带触指失效过程分析[J].中国电机工程学报，2021，41（3）：1146-1156. TIAN Huidong, JIN Shoufeng, GONG Ao, et al. Analysis on the Deterioration Behavior of Electrical Contact Structure Used in Converter Transformer RIP Bushings[J]. Proceedings of the CSEE, 2021, 41(3): 1146-1156.
  [11] 陈云龙，谢强，李晓璇.换流变网侧套管电连接结构的地震响应分析[J].高电压技术，2022，48（6）：2283-2291. CHEN Yunlong, XIE Qiang, LI Xiaoxuan. Seismic Response of Electrical Connection Structure of Grid - side Bushing in Converter Transformer[J]. High Voltage Engineering, 2022, 48(6): 2283-2291.
  [12] 中华人民共和国住房和城乡建设部.建筑振动荷载标准：GB/T 51228—2017[S].北京：中国建筑工业出版社，2017.
  [13] 全国绝缘子标准化技术委员会.交流电压高于1000 V的绝缘套管：GB/T 4109—2008[S].北京：中国标准出版社，2008.
  [14] Milenko Braunovic,Nikolai K. Myshkin,Valery V. Konchits. Electrical Contacts[M]. Taylor and Francis: CRC Press, 2010.
  [15] 郭金花.电连接器典型失效模式及机理分析[J].环境技术，2021， 39（2）：145-149. GUO Jinhua. Typical Failure Analysis Example of Electric Connector[J]. Environmental Technology, 2021, 39(2): 145-149.
  [16] 靳守锋，田汇冬，王浩然，等.特高压GIL电接触结构选型及磨损特性研究[J].电网技术，2022，46（11）：4482-4490.
  [17] 王塞北，彭明军，孙勇，等.金属触头电接触性能研究进展[J].材料导报，2020，34（9）：9117-9123. WANG Saibei, PENG Mingjun, SUN Yong, et al. Research Progress on Electrical Contact Performance of Metal Contacts [J]. Materials Reports, 2020, 34(9): 9117-9123.
  [18] 刘雪扬，孙连娇，曹先洪.低熔点合金界面填充材料减小电连接接触电阻的研究[J].东北电力技术，2022，43（2）：20-24. LIU Xueyang, SUN Lianjiao, CAO Xianhong, et al. Study on Reducing Contact Resistance of Electrical Connection by Using Low Melting Point Alloy Interface Filling Material[J]. Northeast Electric Power Technology, 2022, 43(2): 20-24.
  [19] 张璐，孙蕾，韩彦华，等.不同缺陷下油纸绝缘套管中氢气生成特性研究[J].电网与清洁能源，2021，37（7）：44-50，57. ZHANG Lu, SUN Lei, HAN Yanhua, et al. Hydrogen Generation Characteristics of the Oil Paper Insulated Bushing with Different Inside Defects[J]. Advances of Power System & Hydroelectric Engineering, 2021, 37(7): 44-50, 57.