李正,刘赛,郭昊旻,丁金诚,张宁
LI Zheng,LIU Sai,GUO Haomin,DING Jincheng,ZHANG Ning

• 1:国网江苏省电力公司检修分公司
• 2:国网福建省电力有限公司厦门供电公司

摘要(Abstract)：

针对传统接地导通测试难以找到合适的参考点,且存在测试线过长导致测量误差增大和测试人员移动距离长、劳动强度大等问题,提出一种采用矩阵逆运算的新型接地导通测试优化策略。对传统和新型接地导通测试的流程、参考点与测试点的选择方法、测试原理和测量误差进行了对比分析。结果表明,新方法可大大缩短测试线的长度和测试人员的移动距离,提高了整个测试流程的效率。通过计算二者均方误差,从理论上证明了新型接地导通测试流程的测量误差远小于传统接地导通测试流程。以6×6矩阵接地网为例,对两种测试方法的测量结果进行仿真分析,验证了测量误差理论分析的正确性。
It is difficult selecting a proper reference point in the traditional ground conduction test, and there are also some problems, such as large measurement errors caused by long test line and high labor intensity caused by long moving distance. To solve these problems, this paper proposes a new optimization strategy of test for ground conduction using matrix inverse operation. Firstly, the procedure of the traditional and the new test for ground conduction, the testing principles and measuring errors are compared and analyzed. The result shows that the new method can greatly reduce the length of the test line and the moving distance of the testers, which improves the efficiency of the entire test process. It is proved that the measurement error of the new test is far less than that of the traditional test theoretically by calculating mean square error. Finally, taking a 6×6 matrix grounding grid as an example, the measurement results of both tests are simulated and analyzed. The simulation results indicate that the measurement accuracy of new test for ground conduction applying inverse of matrix are improved significantly, which verifies the correctness of the theoretical analysis of measurement error.

关键词(KeyWords)： 接地导通测试;导通电阻;矩阵逆运算;误差分析;参考点;测试点
test for ground conduction;conducting resistance;matrix inverse operation;error analysis;reference point;testing point

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 李正,刘赛,郭昊旻,丁金诚,张宁
LI Zheng,LIU Sai,GUO Haomin,DING Jincheng,ZHANG Ning

参考文献(References)：

• [1]中国电力企业联合会.接地装置特性参数测量导则：DL/T475-2006[S].北京：中国电力出版社，2008．
• [2]程连彦，戴向伟，耿颖杰，等.变电站多点接地设备导通测试分析[J].电子技术，2020,49(4):118-119.
• [3]董刚.接地导通测试仪测量不确定度评估[J].工业计量，2017,27(5):47-48.
• [4]曹小龙.电力设备接地引下线导通测试方法的探讨[J].电瓷避雷器，2010(5):41-44,47.
• [5]郑厚昌，韦明小，任达香，等.缩短变电站变电运维接地导通测试工作时间[J].电力技术，2021(6):136-137.
• [6]郭美玉，朱小明，陆新东，等.双回路接地导通电阻测试仪测量方法研究[J].工业计量，2019,29(6):83-85,89.
• [7]梁庆凡，孙标，刘卫新.接地导通电阻测试仪测量结果的不确定度评定[J].轻工标准与质量，2019,164（增刊2):90-91.
• [8]张仁豫，陈昌鱼，王昌长.高电压试验技术[M].2版.北京：清华大学出版社，2008.