| 66 | 0 | 10 |
| 下载次数 | 被引频次 | 阅读次数 |
针对某燃气-蒸汽联合循环机组给水泵投产初期多次发生给水泵平衡盘磨损问题，结合给水泵运行方式和故障现象，从平衡盘和最小流量阀工作原理出发，分析平衡盘的磨损原因，得出给水泵启动过程中低转速运行时间长是平衡盘频繁磨损的主要原因。同时提出了给水泵变频升速曲线优化方案，通过设定变频器不同的加速时间，并利用DCS进行逻辑控制，减少给水泵低转速运行时间，解决了给水泵平衡盘异常磨损问题，提高了给水泵设备可靠性。
Abstract：Aiming at the multiple wear issues of the balance disc of the feed water pump in a gas-steam combined cycle unit during the initial production stage, combined with operation mode and fault phenomenon of the feed water pump,starting from the working principles of the balance disc and the minimum flow valve, the reasons for the wear of the balance disc are analyzed. It is concluded that the main reason for frequent wear of the balance disc is the long running time at low speed during the start-up process of the feed water pump. At the same time, this paper puts forward the optimization scheme of frequency conversion and speed-up curve of feed water pump. By setting different acceleration time of frequency converter and using DCS to carry out logic control, the running time of low speed of the feed water pump is reduced, and the problem of abnormal wear of balance disc of feed water pump is solved, which improving the reliability of feed water pump equipment.
[1]王锡辉，朱晓星，陈厚涛，等.燃煤机组辅机设备运行健康状态在线评估方法及应用[J].中国电机工程学报，2022,42(7):2597-2605.WANG Xihui,ZHU Xiaoxing,CHEN Houtao,et al.Application of an Online Evaluation Method for Operating Health Status of Auxiliary Equipment in Coal-fired Power Plants[J].Proceedings of the CSEE,2022,42(7):2597-2605.
[2]邹罗明，秦殿山，宗纪州.基于价值工程的热机设备选型方法分析及实践[J].南方能源建设，2022,9(增刊2):18-23.
[3]董言，董玮，黄梦旗，等.基于CFD的离心泵轴向力计算与平衡研究综述[J].水利与建筑工程学报，2021,19(1):8-15.DONG Yan,DONG Wei,HUANG Mengqi,et al.A Review of CFD Based Axial Force Calculation and Balance of Centrifugal Pump[J].Journal of Water Resources and Architectural Engineering,2021,19(1):8-15.
[4]程效锐，常正柏，王堃.高速离心泵平衡孔轴面安放角对其性能的影响[J].西华大学学报(自然科学版)，2020,39(1):92-99.CHENG Xiaorui,CHANG Zhengbai,WANG Kun.Effect of Balancing Hole Meridianal Angle on Performance of High Speed Centrifugal Pump[J].Journal of Xihua University(Natural Science Edition),2020,39(1):92-99.
[5]赵万勇，虎兴娜，宋乾斌.节段式多级离心泵轴向力的计算与分析[J].煤矿机械，2018,39(11):15-17.ZHAO Wanyong,HU Xingna,SONG Qianbin.Calculation and Analysis of Axial Force of Segment Multi-stage Centrifugal Pump[J].Coal Mine Machinery,2018,39(11):15-17.
[6]陈红军，张铁罕，王昌荣.SDZ310型超高压多级离心泵的结构特性[J].排灌机械工程学报，2018,36(7):567-572.CHEN Hongjun,ZHANG Tiehan,WANG Changrong.Structural characteristics of ultrahigh-pressure multistage centrifugal pump typed SDZ310[J].Journal of Drainage and Irrigation Machinery Engineering,2018,36(7):567-572.
[7]钱晨，杨从新，富友，等.平衡鼓间隙对首级叶轮前泵腔压力及多级泵轴向力的影响[J].农业工程学报，2019,35(2):33-39.QIAN Chen,YANG Congxin,FU You,et al.Influence of balance drum clearance on pressure of front cavity of first stage impeller and axial force of multistage pump[J].Transactions of the Chinese Society of Agricultural Engineering,2019,35(2):33-39.
[8]邓云天.基于高压变频调速技术的电动给水泵节能改造[J].机械制造，2020,58(7):42-45.DENG Yuntian.Energy-saving transformation of motor-driven feed pumb based on high voltage frequency control technology[J].Machinery,2020,58(7):42-45.
[9]赵雪杉，潘效军.深度调峰机组电动给水泵的变频改造节能分析[J].山东科学，2022,35(3):54-61.ZHAO Xueshan,PAN Xiaojun.Energy-saving analysis of the frequency conversion transformation of an electric boiler water feed pump of the deep peak regulation unit[J].Shandong Science,2022,35(3):54-61.
[10]黄思林，唐昊，王善同，等.330 MW机组电动给水泵变频改造及电液并存调速控制策略研究[J].广东电力，2023,36(2):143-150.HUANG Silin,TANG Hao,WANG Shantong,et al.Frequency Conversion Renovation and Research on Comprehensive Speed Control Strategy of Electric Feed Water Pump for 330MW Unit[J].Guangdong Electric Power,2023,36(2):143-150.
[11]万杰，孙建国，石家魁，等.火电机组给水泵小汽轮机转速线性控制的变斜率优化方法[J].汽轮机技术，2020,62(6):469-472.WAN Jie,SUN Jianguo,SHI Jiakui,et al.Variable Slope Optimization Method for Small Steam Turbine Linear Control of Thermal Power unit′s Feed Pump[J].Turbine Technology,2020,62(6):469-472.
[12]马超，朱宝.给水泵汽轮机性能实验及其改造效益计算方法[J].节能技术，2022,40(1):73-76.MA Chao,ZHU Bao.Performance Test of Feed Pump Turbine and Calculation Method of Transformation Benefit[J].Energy Conservation Technology,2022,40(1):73-76.
[13]汪东山，杜永峰，吕雪.平衡孔位置对离心泵轴向力影响的数值模拟研究[J].液压气动与密封，2021,41(10):9-14.WANG Dongshan,DU Yongfeng,LYU Xue.Numerical Simulation Research on the Influence of Balance Hole Position on the Axial Force of Centrifugal Pump[J].Hydraulics Pneumatics&Seals,2021,41(10):9-14.
[14]马众，卢辉，史黎明.钢铁厂加热炉汽化系统给水泵调试案例分析[J].工业炉，2020,42(4):49-51.MA Zhong,LU Hui,SHI Liming.Case Analysis of Feedwater Pump Commissioning of Heating Furnace Vaporization System in Steel Plant[J].Industrial Furnace,2020,42(4):49-51.
[15]刘佳，陈雪峰，费天文，等.锅炉给水泵最小流量调节阀结构设计与仿真[J].工业仪表与自动化装置，2020(3):43-45.LIU Jia,CHEN Xuefeng,FEI Tianwen,et al.Design and simulation of minimum flow regulating valve of boiler feed pump[J].Industrial Instrumentation&Automation,2020(3):43-45.
[16]陈友顺.超超临界660 MW机组给水泵再循环阀的优化改造[J].节能技术，2021,39(1):88-90,96.CHEN Youshun.Recirculation Valve′s Optimization and Modification of Ultra-supercritical 660 MW Units′Feed Water Pump[J].Energy Conservation Technology,2021,39(1):88-90,96.
[17]董志强.蜗壳式混流泵轴向力的数值计算与试验验证[J].排灌机械工程学报，2020,38(4):339-345.DONG Zhiqiang.Numerical calculation and experimental verification for axial force on mixed flow pump[J].Journal of Drainage and Irrigation Machinery Engineering,2020,38(4):339-345.
[18]钱晨，杨从新，胡小杰，等.平衡鼓间隙对多级泵后腔压力及轴向力的影响[J].排灌机械工程学报，2020,38(3):236-240,247.QIAN Chen,YANG Congxin,HU Xiaojie,et al.Influence of blance drum clearance on axial thrust and pressure in rear chamber of last stage impeller of multistage centrifugal pump[J].Journal of Drainage and Irrigation Machinery Engineering,2020,38(3):236-240,247.
[19]李怀瑞.导叶式多级离心泵作透平力特性及压力脉动研究[D].兰州：兰州理工大学，2020.
[20]徐科，刘洪群，薛新才，等.汽动给水泵平衡盘开裂原因分析[J].热加工工艺，2019,48(1):248-251.XU Ke,LIU Hongqun,XUE Xincai,et al.Cracking Reason Analysis of Balance Disk of Steam-driven Feed-water Pump[J].Hot Working Technology,2019,48(1):248-251.
[21]刘星.国产汽动泵平衡盘司太立合金堆焊层裂纹原因分析及改进[J].核科学与工程，2020,40(4):718-728.LIU Xing.Analysis and Improvement of Cracks in Stellite Surfacing Layer of Domestic Pneumatic Pum Balance Plate[J].Nuclear Science and Engineering,2020,40(4):718-728.
[22]那腾及，孙长青，郝春，等.给水泵最小流量循环阀结构设计及数值模拟[J].液压与气动，2022,46(3):138-144.NA Tengji,SUN Changqing,HAO Chun,et al.Structure Design and Numerical Simulation of Minimum Flow Regulating Valve for Feed-water Pump[J].Chinese Hydraulics&Pneumatics,2022,46(3):138-144.
[23]高健.节段式多级离心泵高压变频节能改造方法[J].冶金自动化，2019,43(2):66-69.GAO Jian.High-voltage frequency conversion energy-saving reforming method for segmented multistage centrifugal pump[J].Metallurgical Industry Automation,2019,43(2):66-69.
[24]虎兴娜.DG型多级泵平衡盘-转子系统启动过程的瞬态特性研究[J].流体机械，2019,47(6):24-28.HU Xingna.Study on Transient Characteristics of DG Type Multistage Pump Balance Disk-Rotor System During Starting Process[J].Fluid Machinery,2019,47(6):24-28.
[25]韩辉，程德权，徐赫.基于堆叠降噪自编码的给水泵轴承故障诊断[J].机电工程技术，2021,50(4):254-258.HAN Hui,CHENG Dequan,XU He.Fault Diagnosis of Feed Pump Bearing Based on SDAE[J].Mechanical&Electrical Engineering Technology,2021,50(4):254-258.
[26]王树强，孙开宝，张钊，等.安全相关泵组小流量定期试验验收准则的改进研究[J].核科学与工程，2020,40(6):1054-1059.WANG Shuqiang,SUN Kaibao,ZHANG Zhao,et al.Improvement Study on the Duration of Minimum Flow Periodic Tests of Safety-related Pumps[J].Nuclear Science and Engineering,2020,40(6):1054-1059.
[27]成科，岳维亮，胡四兵，等.间隙汽蚀对高压多级离心泵的影响分析[J].流体机械，2021,49(5):74-79.CHENG Ke,YUE Weiliang,HU Sibing,et al.Research on the effect of clearance cavitation on high pressure multistage centrifugal pump[J].Fluid Machinery,2021,49(5):74-79.
[28]上海凯士比泵有限公司.HGC3/11给水泵安装使用说明书[Z].上海：上海凯工比泵有限公司，2009.
[29]张鹏飞，樊越.机电一体化行星齿轮调速与变频调速应用探讨[J].南方能源建设，2022,9(增刊2):59-67.
基本信息:
DOI：10.19929/j.cnki.nmgdljs.2023.0091
中图分类号:TM611.31
引用信息:
[1]周柏成,茆亚平,姜冠军.变频调速给水泵平衡盘磨损原因分析及对策[J].内蒙古电力技术,2023,41(06):96-101.DOI:10.19929/j.cnki.nmgdljs.2023.0091.
基金信息: